To design my clock, I decided to use Vectorworks. After one of my friends gave me a brief tutorial on it, I found it to be much more intuitive than Fusion360.
Once I successfully designed my clock in Vectorworks, I converted it to a DXF file. I then used a laser cutter to execute the cuts. I used a large piece of 1/4" luan as my material for the clock.
After my clock was successfully printed, I added 1/4" luan spacers in between the larger pieces of luan to give the clock further dimension (see image below). I then glued all pieces of the wood together with super glue.
Once the glue had dried, I sanded the edges to give the clock a smooth, soft finish.
Content Rating
Is this a good/useful/informative piece of content to include in the project? Have your say!
You must login before you can post a comment. .