In the picture above, you can see the handle in various stages of the process. From left to right: clay model, (light orange) plastic casting directly after removal from the mold, (blue) plastic casting after using a dremel, (green) plastic casting after dremel and sanding.

Below are some pictures of the silicone mold and molding process. Unfortunately, I ran into trouble with the flap on the inner edges of the silicone mold that would create the crevice for the pot to be inserted in. When I was making the second half of the mold, the flap ripped in half, and after the blue plastic casting, parts of it ripped off completely. This led to a pretty messy crevice that required a lot of work with a dremel to get it to a usable state, and even after that it doesn't look that clean.