Back to Parent

After I shaped my grip in clay the next step was to create the mold that I would use to cast multiple copies of my grip with resin. I decided to make my mold in two parts. I first made a box out of foam core and placed my grip into it. I had to make sure that the box allowed for at least 3/4" on all sides of my grip in all directions. I then filled the box with clay up to the top surface along the contour of my clay grip. I then poured silicon into the box and allowed it to dry. I did the same thing with the other side of the grip. After doing this process twice, I ended up with two silicon molds that fit against each other perfectly.

Content Rating

Is this a good/useful/informative piece of content to include in the project? Have your say!