#include <neopixel.h>
// IMPORTANT: Set pixel COUNT, PIN and TYPE
#define PIXEL_PIN D2
#define PIXEL_COUNT 16
#define PIXEL_TYPE WS2812
Adafruit_NeoPixel strip = Adafruit_NeoPixel(PIXEL_COUNT, PIXEL_PIN, PIXEL_TYPE);
void setup() {
strip.begin();
strip.show(); // Initialize all pixels to 'off'
}
void loop() {
uint16_t i;
uint32_t c1 = strip.Color(0, 0, 255);
uint32_t c2 = strip.Color(255, 0, 0);
uint32_t c3 = strip.Color(0, 255, 0);
uint32_t c4 = strip.Color(255, 255, 255);
for(i=0; i< strip.numPixels(); i++) {
strip.setPixelColor(i, c1 );
strip.show();
delay( 100 );
}
for(i=0; i< strip.numPixels(); i++) {
strip.setPixelColor(i, c2 );
strip.show();
delay( 100 );
}
for(i=0; i< strip.numPixels(); i++) {
strip.setPixelColor(i, c3 );
strip.show();
delay( 100 );
}
for(i=0; i< strip.numPixels(); i++) {
strip.setPixelColor(i, c4 );
strip.show();
delay( 100 );
}
delay( 100 );
}
Click to Expand
Content Rating
Is this a good/useful/informative piece of content to include in the project? Have your say!
You must login before you can post a comment. .