int redPin = A5;
int greenPin = A4;
int bluePin = A3;

int redValue = 255; // Full brightness for an Cathode RGB LED is 0, and off 255
int greenValue = 255; // Full brightness for an Cathode RGB LED is 0, and off 255
int blueValue = 255; // Full brightness for an Cathode RGB LED is 0, and off 255

int ledPin = D2;
int ledPin2 = D3;

int ledControl(String command)
{
   int state = LOW;

   // find out the state of the led
   if(command == "HIGH" || command == "HI"){
	   state = HIGH;
   }else if(command == "LOW" || command == "LO"){ 
	   state = LOW;
   }else{
	   return -1;
   }

   // write to the appropriate pin
   digitalWrite(ledPin, state);
   return 1;
}

int led2Control(String command)
{
   int state = LOW;

   // find out the state of the led
   if(command == "HIGH" || command == "HI"){
	   state = HIGH;
   }else if(command == "LOW" || command == "LO"){ 
	   state = LOW;
   }else{
	   return -1;
   }

   // write to the appropriate pin
   digitalWrite(ledPin2, state);
   return 1;
}

int RGBControl(String command){
    //0 is HI, 255 is LOW b/c CATHODE RGB LED
    String colors[3];
    colors[0]="";
    colors[1]="";
    colors[2]="";

    int index = 0;
    for( int i = 0; i < command.length(); i++ )
    {
      if( index < 3 ){
        char c = command.charAt(i);
        colors[index] += c;

        if( c == ',') index++;
      }
    }

    // get the red component...
    redValue = colors[0].toInt();
    // now green
    greenValue = colors[1].toInt();
    // now blue
    blueValue = colors[2].toInt();

   // write the mixed color
   analogWrite( redPin, redValue);
   analogWrite( greenPin, greenValue);
   analogWrite( bluePin, blueValue);

   return 1;
}

void setup() {
    // Configure the pins to be outputs
   pinMode(ledPin, OUTPUT);
   pinMode(ledPin2, OUTPUT);
   
   //Uses CATHODE RGB LED, 255 is OFF, 0 is ON
   pinMode(redPin, OUTPUT);
   pinMode(greenPin, OUTPUT);
   pinMode(bluePin, OUTPUT);
   //Start up as OFF
   analogWrite(redPin, 255);
   analogWrite(greenPin, 255);
   analogWrite(bluePin, 255);

   // Initialize both the LEDs to be OFF
   digitalWrite(ledPin, LOW);
   digitalWrite(ledPin2, LOW);
   
   //Register our Particle function here
   Particle.function("led", ledControl);
   Particle.function("led2", led2Control);
   
   //RGB
   Particle.function("RGB LED", RGBControl);
}

void loop() {
    //loop
    //particle analog read range is 0-4095
}