Outcome:
In this project, we explored using Webhook to trigger information for rotating servo motors. Since we are three in a pair, we convey the same signal in one way like A to B, B to C, C to A.
Process:
We start experiment with led. By pushing the bottom on each controller, the other's led should be blinking. Then we start to using motor and switch to control and display. Every time the controller's switch pushed, it's motor will rotate and also triggering the other device's motor to rotate.
Next Steps:
As our final project proposed, we are planing to use hall effect sensor and magnet to trigger the rotation of motors.
Reflection:
It was fun to see the series of transferring while telling apart where the servo rotation is triggered from. Once person 'A' switches on the one's circuit board, it directly triggers its servo and in a second conveys the same signal to 'B's servo motor. Once 'B' receives the signal, one can start the triggering to send the signal to one and 'C'. In a row, we could make round signal-transfer-points.
Content Rating
Is this a good/useful/informative piece of content to include in the project? Have your say!
You must login before you can post a comment. .