EXTERNAL FUNCTION 2
/*-------------------------------------------------------------------------
Spark Core library to control WS2811/WS2812 based RGB
LED devices such as Adafruit NeoPixel strips.
Currently handles 800 KHz and 400kHz bitstream on Spark Core,
WS2812, WS2812B and WS2811.
Also supports:
- Radio Shack Tri-Color Strip with TM1803 controller 400kHz bitstream.
- TM1829 pixels
Written by Phil Burgess / Paint Your Dragon for Adafruit Industries.
Modified to work with Spark Core by Technobly.
Contributions by PJRC and other members of the open source community.
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing products
from Adafruit!
--------------------------------------------------------------------*/
/* ======================= Adafruit_NeoPixel.cpp ======================= */
/*-------------------------------------------------------------------------
This file is part of the Adafruit NeoPixel library.
NeoPixel is free software: you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as
published by the Free Software Foundation, either version 3 of
the License, or (at your option) any later version.
NeoPixel is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with NeoPixel. If not, see
<http://www.gnu.org/licenses/>.
-------------------------------------------------------------------------*/
#include "neopixel.h"
Adafruit_NeoPixel::Adafruit_NeoPixel(uint16_t n, uint8_t p, uint8_t t) : \
numLEDs(n), numBytes(n*3), type(t), pin(p), pixels(NULL)
{
if((pixels = (uint8_t *)malloc(numBytes))) {
memset(pixels, 0, numBytes);
}
}
Adafruit_NeoPixel::~Adafruit_NeoPixel() {
if(pixels) free(pixels);
pinMode(pin, INPUT);
}
void Adafruit_NeoPixel::begin(void) {
pinMode(pin, OUTPUT);
digitalWrite(pin, LOW);
}
void Adafruit_NeoPixel::show(void) {
if(!pixels) return;
// Data latch = 24 or 50 microsecond pause in the output stream. Rather than
// put a delay at the end of the function, the ending time is noted and
// the function will simply hold off (if needed) on issuing the
// subsequent round of data until the latch time has elapsed. This
// allows the mainline code to start generating the next frame of data
// rather than stalling for the latch.
uint32_t wait_time; // wait time in microseconds.
switch(type) {
case TM1803: // TM1803 = 24us reset pulse
wait_time = 24L;
break;
case TM1829: // TM1829 = 500us reset pulse
wait_time = 500L;
break;
case WS2812B: // WS2812 & WS2812B = 50us reset pulse
case WS2811: // WS2811 = 50us reset pulse
default: // default = 50us reset pulse
wait_time = 50L;
break;
}
while((micros() - endTime) < wait_time);
// endTime is a private member (rather than global var) so that multiple
// instances on different pins can be quickly issued in succession (each
// instance doesn't delay the next).
__disable_irq(); // Need 100% focus on instruction timing
volatile uint32_t
c, // 24-bit pixel color
mask; // 8-bit mask
volatile uint16_t i = numBytes; // Output loop counter
volatile uint8_t
j, // 8-bit inner loop counter
*ptr = pixels, // Pointer to next byte
g, // Current green byte value
r, // Current red byte value
b; // Current blue byte value
if(type == WS2812B) { // same as WS2812, 800 KHz bitstream
while(i) { // While bytes left... (3 bytes = 1 pixel)
mask = 0x800000; // reset the mask
i = i-3; // decrement bytes remaining
g = *ptr++; // Next green byte value
r = *ptr++; // Next red byte value
b = *ptr++; // Next blue byte value
c = ((uint32_t)g << 16) | ((uint32_t)r << 8) | b; // Pack the next 3 bytes to keep timing tight
j = 0; // reset the 24-bit counter
do {
PIN_MAP[pin].gpio_peripheral->BSRR = PIN_MAP[pin].gpio_pin; // HIGH
if (c & mask) { // if masked bit is high
// WS2812 spec 700ns HIGH
// Adafruit on Arduino (meas. 812ns)
// This lib on Spark Core (meas. 792ns)
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t"
::: "r0", "cc", "memory");
// WS2812 spec 600ns LOW
// Adafruit on Arduino (meas. 436ns)
// This lib on Spark Core (meas. 472ns)
PIN_MAP[pin].gpio_peripheral->BRR = PIN_MAP[pin].gpio_pin; // LOW
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
}
else { // else masked bit is low
// WS2812 spec 350ns HIGH
// Adafruit on Arduino (meas. 312ns)
// This lib on Spark Core (meas. 306ns)
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
// WS2812 spec 800ns LOW
// Adafruit on Arduino (meas. 938ns)
// This lib on Spark Core (meas. 932ns)
PIN_MAP[pin].gpio_peripheral->BRR = PIN_MAP[pin].gpio_pin; // LOW
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
}
mask >>= 1;
} while ( ++j < 24 ); // ... pixel done
} // end while(i) ... no more pixels
}
else if(type == WS2811) { // WS2811, 400 KHz bitstream
while(i) { // While bytes left... (3 bytes = 1 pixel)
mask = 0x800000; // reset the mask
i = i-3; // decrement bytes remaining
r = *ptr++; // Next red byte value
g = *ptr++; // Next green byte value
b = *ptr++; // Next blue byte value
c = ((uint32_t)r << 16) | ((uint32_t)g << 8) | b; // Pack the next 3 bytes to keep timing tight
j = 0; // reset the 24-bit counter
do {
PIN_MAP[pin].gpio_peripheral->BSRR = PIN_MAP[pin].gpio_pin; // HIGH
if (c & mask) { // if masked bit is high
// WS2811 spec 1.20us HIGH
// Adafruit on Arduino (meas. 1.25us)
// This lib on Spark Core (meas. 1.25us)
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
// WS2811 spec 1.30us LOW
// Adafruit on Arduino (meas. 1.25us)
// This lib on Spark Core (meas. 1.25us)
PIN_MAP[pin].gpio_peripheral->BRR = PIN_MAP[pin].gpio_pin; // LOW
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
}
else { // else masked bit is low
// WS2811 spec 500ns HIGH
// Adafruit on Arduino (meas. 500ns)
// This lib on Spark Core (meas. 500ns)
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
// WS2811 spec 2.000us LOW
// Adafruit on Arduino (meas. 2.000us)
// This lib on Spark Core (meas. 2.000us)
PIN_MAP[pin].gpio_peripheral->BRR = PIN_MAP[pin].gpio_pin; // LOW
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
}
mask >>= 1;
} while ( ++j < 24 ); // ... pixel done
} // end while(i) ... no more pixels
}
else if(type == TM1803) { // TM1803 (Radio Shack Tri-Color Strip), 400 KHz bitstream
while(i) { // While bytes left... (3 bytes = 1 pixel)
mask = 0x800000; // reset the mask
i = i-3; // decrement bytes remaining
r = *ptr++; // Next green byte value
g = *ptr++; // Next red byte value
b = *ptr++; // Next blue byte value
c = ((uint32_t)r << 16) | ((uint32_t)g << 8) | b; // Pack the next 3 bytes to keep timing tight
j = 0; // reset the 24-bit counter
do {
PIN_MAP[pin].gpio_peripheral->BSRR = PIN_MAP[pin].gpio_pin; // HIGH
if (c & mask) { // if masked bit is high
// TM1803 spec 1.36us HIGH
// Pololu on Arduino (meas. 1.31us)
// This lib on Spark Core (meas. 1.36us)
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
// TM1803 spec 680ns LOW
// Pololu on Arduino (meas. 1.024us)
// This lib on Spark Core (meas. 670ns)
PIN_MAP[pin].gpio_peripheral->BRR = PIN_MAP[pin].gpio_pin; // LOW
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
}
else { // else masked bit is low
// TM1803 spec 680ns HIGH
// Pololu on Arduino (meas. 374ns)
// This lib on Spark Core (meas. 680ns)
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
// TM1803 spec 1.36us LOW
// Pololu on Arduino (meas. 2.00us)
// This lib on Spark Core (meas. 1.36us)
PIN_MAP[pin].gpio_peripheral->BRR = PIN_MAP[pin].gpio_pin; // LOW
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
}
mask >>= 1;
} while ( ++j < 24 ); // ... pixel done
} // end while(i) ... no more pixels
}
else { // must be only other option TM1829, 800 KHz bitstream
while(i) { // While bytes left... (3 bytes = 1 pixel)
mask = 0x800000; // reset the mask
i = i-3; // decrement bytes remaining
r = *ptr++; // Next red byte value
b = *ptr++; // Next blue byte value
g = *ptr++; // Next green byte value
c = ((uint32_t)r << 16) | ((uint32_t)b << 8) | g; // Pack the next 3 bytes to keep timing tight
j = 0; // reset the 24-bit counter
PIN_MAP[pin].gpio_peripheral->BRR = PIN_MAP[pin].gpio_pin; // LOW
for( ;; ) { // ... pixel done
if (c & mask) { // if masked bit is high
// TM1829 spec 800ns LOW
// This lib on Spark Core (meas. 792ns)
mask >>= 1; // Do this task during the long delay of this bit
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
j++;
// TM1829 spec 300ns HIGH
// This lib on Spark Core (meas. 319ns)
PIN_MAP[pin].gpio_peripheral->BSRR = PIN_MAP[pin].gpio_pin; // HIGH
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
if(j==24) break;
PIN_MAP[pin].gpio_peripheral->BRR = PIN_MAP[pin].gpio_pin; // LOW
}
else { // else masked bit is low
// TM1829 spec 300ns LOW
// This lib on Spark Core (meas. 306ns)
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
// TM1829 spec 800ns HIGH
// This lib on Spark Core (meas. 805ns)
PIN_MAP[pin].gpio_peripheral->BSRR = PIN_MAP[pin].gpio_pin; // HIGH
j++;
mask >>= 1; // Do this task during the long delay of this bit
asm volatile(
"mov r0, r0" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
"nop" "\n\t" "nop" "\n\t" "nop" "\n\t" "nop" "\n\t"
::: "r0", "cc", "memory");
if(j==24) break;
PIN_MAP[pin].gpio_peripheral->BRR = PIN_MAP[pin].gpio_pin; // LOW
}
}
} // end while(i) ... no more pixels
}
__enable_irq();
endTime = micros(); // Save EOD time for latch on next call
}
// Set the output pin number
void Adafruit_NeoPixel::setPin(uint8_t p) {
pinMode(pin, INPUT);
pin = p;
pinMode(p, OUTPUT);
digitalWrite(p, LOW);
}
// Set pixel color from separate R,G,B components:
void Adafruit_NeoPixel::setPixelColor(
uint16_t n, uint8_t r, uint8_t g, uint8_t b) {
if(n < numLEDs) {
if(brightness) { // See notes in setBrightness()
r = (r * brightness) >> 8;
g = (g * brightness) >> 8;
b = (b * brightness) >> 8;
}
uint8_t *p = &pixels[n * 3];
switch(type) {
case WS2812B: // WS2812 & WS2812B is GRB order.
*p++ = g;
*p++ = r;
*p = b;
break;
case TM1829: // TM1829 is special RBG order
if(r == 255) r = 254; // 255 on RED channel causes display to be in a special mode.
*p++ = r;
*p++ = b;
*p = g;
break;
case WS2811: // WS2811 is RGB order
case TM1803: // TM1803 is RGB order
default: // default is RGB order
*p++ = r;
*p++ = g;
*p = b;
break;
}
}
}
// Set pixel color from 'packed' 32-bit RGB color:
void Adafruit_NeoPixel::setPixelColor(uint16_t n, uint32_t c) {
if(n < numLEDs) {
uint8_t
r = (uint8_t)(c >> 16),
g = (uint8_t)(c >> 8),
b = (uint8_t)c;
if(brightness) { // See notes in setBrightness()
r = (r * brightness) >> 8;
g = (g * brightness) >> 8;
b = (b * brightness) >> 8;
}
uint8_t *p = &pixels[n * 3];
switch(type) {
case WS2812B: // WS2812 & WS2812B is GRB order.
*p++ = g;
*p++ = r;
*p = b;
break;
case TM1829: // TM1829 is special RBG order
if(r == 255) r = 254; // 255 on RED channel causes display to be in a special mode.
*p++ = r;
*p++ = b;
*p = g;
break;
case WS2811: // WS2811 is RGB order
case TM1803: // TM1803 is RGB order
default: // default is RGB order
*p++ = r;
*p++ = g;
*p = b;
break;
}
}
}
// Convert separate R,G,B into packed 32-bit RGB color.
// Packed format is always RGB, regardless of LED strand color order.
uint32_t Adafruit_NeoPixel::Color(uint8_t r, uint8_t g, uint8_t b) {
return ((uint32_t)r << 16) | ((uint32_t)g << 8) | b;
}
// Query color from previously-set pixel (returns packed 32-bit RGB value)
uint32_t Adafruit_NeoPixel::getPixelColor(uint16_t n) const {
if(n < numLEDs) {
uint16_t ofs = n * 3;
return (uint32_t)(pixels[ofs + 2]) |
((uint32_t)(pixels[ofs ]) << 8) |
((uint32_t)(pixels[ofs + 1]) << 16);
}
return 0; // Pixel # is out of bounds
}
uint8_t *Adafruit_NeoPixel::getPixels(void) const {
return pixels;
}
uint16_t Adafruit_NeoPixel::numPixels(void) const {
return numLEDs;
}
// Adjust output brightness; 0=darkest (off), 255=brightest. This does
// NOT immediately affect what's currently displayed on the LEDs. The
// next call to show() will refresh the LEDs at this level. However,
// this process is potentially "lossy," especially when increasing
// brightness. The tight timing in the WS2811/WS2812 code means there
// aren't enough free cycles to perform this scaling on the fly as data
// is issued. So we make a pass through the existing color data in RAM
// and scale it (subsequent graphics commands also work at this
// brightness level). If there's a significant step up in brightness,
// the limited number of steps (quantization) in the old data will be
// quite visible in the re-scaled version. For a non-destructive
// change, you'll need to re-render the full strip data. C'est la vie.
void Adafruit_NeoPixel::setBrightness(uint8_t b) {
// Stored brightness value is different than what's passed.
// This simplifies the actual scaling math later, allowing a fast
// 8x8-bit multiply and taking the MSB. 'brightness' is a uint8_t,
// adding 1 here may (intentionally) roll over...so 0 = max brightness
// (color values are interpreted literally; no scaling), 1 = min
// brightness (off), 255 = just below max brightness.
uint8_t newBrightness = b + 1;
if(newBrightness != brightness) { // Compare against prior value
// Brightness has changed -- re-scale existing data in RAM
uint8_t c,
*ptr = pixels,
oldBrightness = brightness - 1; // De-wrap old brightness value
uint16_t scale;
if(oldBrightness == 0) scale = 0; // Avoid /0
else if(b == 255) scale = 65535 / oldBrightness;
else scale = (((uint16_t)newBrightness << 8) - 1) / oldBrightness;
for(uint16_t i=0; i<numBytes; i++) {
c = *ptr;
*ptr++ = (c * scale) >> 8;
}
brightness = newBrightness;
}
}
Click to Expand
Content Rating
Is this a good/useful/informative piece of content to include in the project? Have your say!
You must login before you can post a comment. .