Outcome

Intention

My roommates and I hardly check our mailbox. Sometimes, the mails stack up. After a while, the mails stack up. A simple device that alerts us about new mail would be helpful.

Move up Delete Move down

Goal

The goal is to create a device that sends an email every time my mailbox is opened.

Move up Delete Move down

Process

The device uses an LED and a PIR sensor. Every time the PIR sensor detects motion, the LED lights up. The Particle photon is connected to the Wi-FI at home. So, the device sends an email notifying me about this event.

Components

Particle Photon

PIR Sensor

LED ( Red ) : Motion Indication

1 Resistors 1k ohms

Jumper wires

Move up Delete Move down

Outcome

...

Move up Delete Move down

Reflection

This is my first IOT project. There are lots of room for improvement. For example, the time of day when a mailbox is opened could be used to make the sensor more efficient. The sensor can be dormant at night. The sensor and particle photon could be housed in a well designed box.

I look forward to creating cool home automation based projects in the future.

Stay tuned.

Move up Delete Move down

Code
#include <time.h>
int inputPin = D2;
int lightPin = D0;
int val = 0;                   // variable for reading the pin status
int lastMailReceivedAt = 0;
int currentTime = 0;

void setup() {
  /*Initialize*/
  pinMode(inputPin, INPUT);     // declare sensor as input
  pinMode(lightPin, OUTPUT);
  lastMailReceivedAt = Time.now();
  Serial.begin(9600);
  digitalWrite(lightPin, LOW);
}

void loop() {
  val = digitalRead(inputPin);  // Read PIR sensor input value
  if( val == 1 ) {
    digitalWrite(lightPin, HIGH);
    currentTime = Time.now();
    /*If condition based on 30 seconds threshold, for email notification*/
    if(currentTime - lastMailReceivedAt > 30 ) {
      Particle.publish("motion-detected","You got mail", PRIVATE);
      lastMailReceivedAt = Time.now();
      delay(1000);
      digitalWrite(lightPin, LOW);
    }
  }
}

Show Advanced Options