IDeATe

Outcome

I built a circuit that senses the intensity of the light around it. The idea behind this is to be able to check how intense or dim the surrounding light is. This could be a good building step to build an IoT device that can sense the light and do a useful action afterwards.

Move up Delete Move down

int photoCellPin = A0;

// Create a variable to hold the light reading
int photoCellReading = 0;

// Define a pin we'll place an LED on
int ledPin = D2;

// Create a variable to store the LED brightness.
int ledBrightness = 0;

void setup() {
    
pinMode(ledPin, OUTPUT);

 // Create a cloud variable of type integer
  // called 'light' mapped to photoCellReading
  Particle.variable("light", &photoCellReading, INT);


}

void loop() {
    
// Use analogRead to read the photo cell reading
  // This gives us a value from 0 to 4095
  photoCellReading = analogRead(photoCellPin);

  // Map this value into the PWM range (0-255)
  // and store as the led brightness
  ledBrightness = map(photoCellReading, 0, 4095, 0, 255);

  // fade the LED to the desired brightness
  analogWrite(ledPin, ledBrightness);

  // wait 1/10th of a second and then loop
  delay(100);

}

Show Advanced Options

Move up Delete Move down

The code above is what programs the sensor to check the light intensity, while showing the reading in the cloud console.
To test it out, I set up the sensor with regular light. When I looked for the light intensity in the cloud console, I would get readings in the 1700-1800 range (this scale is specified in the code). See Video 1 in the video demonstration link below.
For the second test, I turned off some lights off so that the room would be dimmer. I checked the cloud console to see what the light intensity was and as expected, the readings decreased to the 1000-1100s range. This showcases that the sensors work and the code is doing what I wanted it to do. See Video 2 in the video demonstration link below.

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

Show Advanced Options

You can upload files of up to 20MB using this form.

Add Rich Text Add Code Block Add Embeddable Content

Outcome

Attribution

Attribution

Attribution