IDeATe

Outcome

Intention

The goal of this lab was to become familiar with the Argon and turn on a simple LED.

Process

First, I put together the circuit board using the Particle Argon, 1 LED, and 4 wires.

Ultimately I was able to turn on the LED and make it blink at different time intervals. Then I was able to alternate blinking of two LEDs.

Design for Internet of Things: Lab 1 Exercise 0
https://youtube.com/shorts/KTGLjMuguj4


int ledPin = D2;

void setup() {
  // We want to tell the Argon that we'll use
  // D2 as an output pin.
  pinMode(ledPin, OUTPUT);
}

void loop() {
  // First... On
  digitalWrite(ledPin, HIGH);   // Turn ON the LED pins
  delay(1000);               // Wait for 1000mS = 1 second

  // Now... Off
  digitalWrite(ledPin, LOW);   // Turn OFF the LED pins
  delay(1000);               // Wait for 1000mS = 1 second
  // rinse + repeat

}

Show Advanced Options

Move up Delete Move down

Design for Internet of Things: Lab 1 Exercise 1
https://youtube.com/shorts/aiUhuo8BZIk

Move up Delete Move down

int ledPin = D2;

void setup() {
  // We want to tell the Argon that we'll use
  // D2 as an output pin.
  pinMode(ledPin, OUTPUT);
}

void loop() {
  // First... On
  digitalWrite(ledPin, HIGH);   // Turn ON the LED pins
  delay(3000);               // Wait for 1000mS = 1 second

  // Now... Off
  digitalWrite(ledPin, LOW);   // Turn OFF the LED pins
  delay(3000);               // Wait for 1000mS = 1 second
  // rinse + repeat

}

Show Advanced Options

Move up Delete Move down

Design for Internet of Things: Lab 1 Exercise 2
https://youtube.com/shorts/t3bGfnQAU8Y

Move up Delete Move down

int led = D2;

void setup() {
  // We want to tell the Argon that we'll use
  // D2 as an output pin.
  pinMode(led, OUTPUT);
}

void loop() {
    for(int i = 0; i < 5; i++) {
        digitalWrite(led, HIGH);
        delay (500);
        
        digitalWrite(led, LOW);
        delay (500);
    }
    digitalWrite(led, LOW);
    delay(3000);
}

Show Advanced Options

Move up Delete Move down

Design for Internet of Things: Lab 1 Exercise 3
https://youtube.com/shorts/atIDcJozK5g

Move up Delete Move down

int led1 = D2;
int led2 = D3;

void setup() {
  // We want to tell the Argon that we'll use
  // D2 as an output pin.
  pinMode(led1, OUTPUT);
  pinMode(led2, OUTPUT);

}

void loop() {
    
    for(int i = 0; i < 5; i++) {
        digitalWrite(led1, HIGH);
        digitalWrite(led2, LOW);
        delay (500);
        
        digitalWrite(led1, LOW);
        digitalWrite(led2, HIGH);
        delay (500);
    }
    
    delay(3000);
}

Show Advanced Options

You can upload files of up to 20MB using this form.

Add Rich Text Add Code Block Add Embeddable Content

Outcome

Intention

Process

Attribution

Design for Internet of Things: Lab 1 Exercise 1
https://youtube.com/shorts/aiUhuo8BZIk

Attribution

Design for Internet of Things: Lab 1 Exercise 2
https://youtube.com/shorts/t3bGfnQAU8Y

Attribution

Design for Internet of Things: Lab 1 Exercise 3
https://youtube.com/shorts/atIDcJozK5g

Attribution

Outcome

Intention

Process

Attribution

Design for Internet of Things: Lab 1 Exercise 1 https://youtube.com/shorts/aiUhuo8BZIk

Attribution

Design for Internet of Things: Lab 1 Exercise 2 https://youtube.com/shorts/t3bGfnQAU8Y

Attribution

Design for Internet of Things: Lab 1 Exercise 3https://youtube.com/shorts/atIDcJozK5g

Attribution

Design for Internet of Things: Lab 1 Exercise 1
https://youtube.com/shorts/aiUhuo8BZIk

Design for Internet of Things: Lab 1 Exercise 2
https://youtube.com/shorts/t3bGfnQAU8Y

Design for Internet of Things: Lab 1 Exercise 3
https://youtube.com/shorts/atIDcJozK5g