IDeATe

Outcome

Show Advanced Options

Product

In this project, I want to combine what I have learned until now. Therefore, I mixed the components of motors, lights, and switches. This product is great mate when you are preparing for time-limited tasks such as quizzes or tests. The Solenoid ticker will run for 30 seconds and will repeat this process until the desired input time.

Move up Delete Move down

Process

1. Wiring up Timer. The timer in this circuit is a Servo.
2-a. Wiring up Solenoid. The first intention was to make a solenoid sound to indicate a few seconds left until the time was over. However, the solenoid didn't work properly.
2-b. As an alternative, I used Neopixel to gradually glow up when there are less than 1/3 times left compared to the user's input time.
3. Make a switch that starts the whole process. After the user types in the desired time through the console and toggles the switch, the solenoid Time Timer will begin.

Move up Delete Move down

// NeoPixel
#include <neopixel.h>

// Set pixel COUNT, PIN and TYPE
#define PIXEL_PIN D6
#define PIXEL_COUNT 16
#define PIXEL_TYPE WS2812
Adafruit_NeoPixel strip = Adafruit_NeoPixel(PIXEL_COUNT, PIXEL_PIN, PIXEL_TYPE);

// Servo
Servo servo;
int servoPin = A3;

// Switch 
int switchPin = D3;

// User input
int minutes = 0;

void setup() {
    // Setup particle serial monitor
    Serial.begin(9600);
    
    // Setup neopixel
    strip.begin();
    strip.show();
    
    // Setup servo
    servo.attach(servoPin);
    servo.write(0);
    delay(500);
    servo.write(180);
    delay(500);
    
    // Set up switch
    pinMode(switchPin, INPUT_PULLUP);
    
    // Set up particle function
    Particle.function("Set your timer in minutes:", setTime);

}

void loop() {
    // Read switch mode
    int switchState = digitalRead(switchPin);
    int count = 0;
    
    // this loop represents 30 sec timer
    // this loop repeats the number of times of the user input
    if(switchState == LOW) {
        for (int i = 0; i < minutes * 2; i++ ) {
            for (int a = 0; a <= 180; a = a + 6) {
                count++;
                servo.write(a);
                delay(1000);
                // if remaining time is lower that 1/3 of the user input
                // slowly neoPixel glows up into gentle color
                Serial.println(count);
                if (count >= 2 * 60 * minutes / 3) {
                    for (int i = 0; i < strip.numPixels(); i++) {
                        int color = map(count, 0, 60 * minutes, 0, 10);
                        strip.setPixelColor(i, 0, color, 0);
                    }
                    strip.show();                    
                }
            }
        }
        switchState = digitalRead(switchPin);
        // turn off neopixels
        for (int i = 0; i < strip.numPixels(); i++) {
            strip.setPixelColor(i, 0, 0, 0);
        }
        strip.show();  
        count = 0;
    }
}

int setTime(String cmd) {
    minutes = cmd.toInt();
    
    return -1;
}

Show Advanced Options

Move up Delete Move down

Show Advanced Options

You can upload files of up to 20MB using this form.

Add Rich Text Add Code Block Add Embeddable Content

Outcome

Outcome

Attribution

Product

Process

Attribution

Attribution