Outcome

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

/* Knock Sensor
   http://www.arduino.cc/en/Tutorial/Knock
   
   created 25 Mar 2007
   by David Cuartielles <http://www.0j0.org>
   modified 30 Aug 2011
   by Tom Igoe
   This example code is in the public domain.

 */
 
// these constants won't change:
const int ledPin = 11;      // led connected to digital pin 13
const int knockSensor = A0; // the piezo is connected to analog pin 0
const int threshold = 50;  // threshold value to decide when the detected sound is a knock or not

// these variables will change:
int sensorReading = 0;      // variable to store the value read from the sensor pin
int timer = 0;

void setup() {
 pinMode(ledPin, OUTPUT); // declare the ledPin as as OUTPUT
 Serial.begin(9600);       // use the serial port
}

void loop() {
  // read the sensor and store it in the variable sensorReading:
  sensorReading = analogRead(knockSensor);    
  Serial.println(analogRead(sensorReading));
  
  // if the sensor reading is greater than the threshold:
  if (sensorReading <= threshold) {
    //timer initiate
    timer = 800; //800
    // update the LED pin itself:        
    analogWrite(ledPin, 100);
    // send the string "Knock!" back to the computer, followed by newline
  }
  
  if (timer < 1){
   // update the LED pin itself:        
    analogWrite(ledPin, 0); 
    }

  timer = timer-1;
  if (timer <= 0)
  {timer = 0;
  }
  delay(10);
}

Show Advanced Options