Round Square Clock
Made by jyli1
I was inspired to create this clock because I wanted to both laser cut the clock but also give it dimension at the same time. Using wood gave the clock a natural. I had the clock taper out from a square to a circle to give it dimension.
Created: December 8th, 2017
Intention
I was inspired to create this clock because I wanted to both laser cut the clock but also give it dimension at the same time. Using wood gave the clock a natural. I had the clock taper out from a square to a circle to give it dimension.
Process/Procedure
I created each layer of the clock by increasing it by 40 mm for each square. I also used the spine tool to add curves in the side of the square. I also used the fillet tool to add curves on the side of the square.
Product
Reflection
This was the first project I completed in Fusion360 by myself. It was satisfying creating something from design to constructing the clock. I had trouble with the actual fitting of the clock battery inside the clock. I decided to cut the wood out to fit the battery inside the wooden pieces.
DXF file
https://drive.google.com/file/d/1mT4tixTdPON1gCm6PuL4rplKBE2DqrDl/view?usp=sharing
Share this Project
About
I was inspired to create this clock because I wanted to both laser cut the clock but also give it dimension at the same time. Using wood gave the clock a natural. I had the clock taper out from a square to a circle to give it dimension.