// This #include statement was automatically added by the Particle IDE.
#include <neopixel.h>
// IMPORTANT: Set pixel COUNT, PIN and TYPE
#define PIXEL_PIN D2
#define PIXEL_COUNT 16
#define PIXEL_TYPE WS2812
Adafruit_NeoPixel strip = Adafruit_NeoPixel(PIXEL_COUNT, PIXEL_PIN, PIXEL_TYPE);
void setup() {
strip.begin();
strip.show(); // Initialize all pixels to 'off'
}
// Modify the code to light up blue, then red, then green then white in sequence
void loop() {
uint16_t i;
for(i=0; i< strip.numPixels(); i++) {
strip.setPixelColor(i, 0,0,255 ); // blue
}
strip.show(); // set updates to the strip
delay( 1000 );
for(i=0; i< strip.numPixels(); i++) {
strip.setPixelColor(i, 255,0,0 ); // red
}
strip.show(); // set updates to the strip
delay( 1000 );
for(i=0; i< strip.numPixels(); i++) {
strip.setPixelColor(i, 0,255,0 ); // green
}
strip.show(); // set updates to the strip
delay( 1000 );
for(i=0; i< strip.numPixels(); i++) {
strip.setPixelColor(i, 255,255,255 ); // white
}
strip.show(); // set updates to the strip
delay( 1000 );
}
Click to Expand
Content Rating
Is this a good/useful/informative piece of content to include in the project? Have your say!
You must login before you can post a comment. .