IDeATe

Outcome

Through following the lab instructions, I put together the below circuit board using the Particle Argon, 2 LEDs, and 4 wires.

The first code lights up the 2 LEDs one after the other, each flashing for 1 second, and continues in this loop until stopped.

The second code connects the Argon to the cloud, and allows the user to control the LEDs through the Particle Console with "HIGH" and "LOW" commands.

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

Show Advanced Options

Move up Delete Move down

int ledPinR = D2;
int ledPinB = D3;

void setup() {
    pinMode(ledPinR, OUTPUT);
    pinMode(ledPinB, OUTPUT);
}

void loop() {
    digitalWrite(ledPinR, HIGH);
    digitalWrite(ledPinB, LOW);
    delay(1000);
    
    digitalWrite(ledPinR, LOW);
    digitalWrite(ledPinB, HIGH);
    delay(1000);
}

Show Advanced Options

Move up Delete Move down

int ledPinR = D2;
int ledPinB = D3;

void setup()
{
    pinMode(ledPinR, OUTPUT);
    pinMode(ledPinB, OUTPUT);
    digitalWrite(ledPinR, LOW);
    digitalWrite(ledPinB, LOW);
    Particle.function("led", ledControl);
}

void loop()
{
    
}

int ledControl(String command)
{
    int state = LOW;
    if(command == "HIGH") {
        state = HIGH;
    }else if(command == "LOW"){
        state = LOW;
    }else{
        return -1;
    }
    digitalWrite(ledPinR, state);
    digitalWrite(ledPinB, state);
    return 1;
}

Show Advanced Options

Move up Delete Move down

Show Advanced Options

You can upload files of up to 20MB using this form.

Add Rich Text Add Code Block Add Embeddable Content

Outcome

Attribution

Attribution

Attribution

Attribution

Attribution

Attribution