Add New Project
48675 Week 2 Skill Dev
in Physical Computing
1 41 0 0
This is a flex sensor that can display low, medium, high flex on 3 LEDs (green, yellow, red), but only when a button is pressed. When the button is not pressed. all LEDs will be OFF. It is connected to Wi-Fi using a Photon 2 microcontroller.
1 20 0 0
The goal is to practice making a 2-in (sensors or inputs) 1-out (LED) device.
1 27 0 0
Set up a switch that turns on the photosensor for LED
1 8 0 0
1 15 0 0
control a led with a sensor and a switch
1 13 0 0
Set up a push bottom and sensor for the circuit!
1 24 0 0
Developing a simple blinking led to a programmed rhythm as an introduction to IoT.
1 28 0 0
The goal of this project is to build a simple device that allows an LED bulb to blink in a constant rhythm.
1 21 0 0
To complete a basic circuit and experiment with controlling LEDs remotely via cloud interface.
1 51 0 1
Make an LED blink every 1 second.
1 26 0 0
Make an LED that can dim using Wi-Fi control functions and the Photon 2 microcontroller.
in Intelligent Environments
LED Blinking as an intro to IOT device
1 14 0 0
complete the LED Blink Assignment for week 2
get familiar with Particle platform and implement a simple connected LED product
in Physical Computing Physical Computing
1 38 0 0
For this project, I'll be using IFTTT to connect the Particle device to my Google Calendar. This device will alert me with a light 15 minutes before the start of the meeting, while the light gradually changes during those 15 minutes to remind me that the time is approaching, and finally when the meeting starts, the light of the device fades.
1 576 0 0
Control servo movement with Particle Cloud and create a simple interactive gadget.
1 528 0 0
1 542 0 0
A pair of connected devices passing trigger information to each other's servo.
3 593 0 0
1 514 0 0
Work with LEDs
1 146 0 0
Work with inputs and sensors
1 164 0 0
Create an ambient orb that changes color from white to red when it is 15min before any event starts on my google calender
1 141 0 0
1 105 0 0
